AS-302N Lightning Surge Arrestor

  • Lightning Surge Arrestor
  • 1-500MHz
  • 3kW CW handling
  • DC Block
  • Weatherproof

Price excl VAT: £79.16
incl VAT: £94.99

Out of stock

Description

The Array Solutions AS-302N is a Lightning and Surge Protector with 3kW CW 5kW PEP power handling.

Fitted with N-Type Female connectors.

The AS-302N includes a DC Block so no high voltages can reach the shack. The enclosure is fully weatherproof.

You will need a good quality ground connection for this unit as a path for discharge.

Replacement Gas Discharge Tubes are avaiable from us.

  • Dimensions  2″ x 2″x 1.5″inches (50.8 mm x 50.8 mm x 38.1 mm), connector to connector 3.25″ (82 mm)
  • Weight 0.4 lb (0.2 kg)
  • Frequency range: 1 to 500 MHz
  • VSWR under 1.2:1
  • Unique static bleed protection system (see manual)
  • Return Loss: Typically 40 dB
  • 50 ohms (can be used in 75 ohm systems)
  • Insertion Loss (S21) 0.02 dB or less
  • Power Ratings: 3 kW continuous @ 2:1 VSWR, 5 kW @ 1.2:1 VSWR
  • GDT Devices certified to UL497B and UL1449
  • Halogen free
  • Devices tested per ITU K.12 recommendations
  • Non radioactive materials
  • DC spark-over voltage: 600 V, 800 V or 1200 V Depending on GDT installed.
  • 10 operations 8/20 μs 5 kA minimum
  • 1 operation 8/20 μs 10 kA minimum
  • Max. follow current during one voltage half cycle at 50 Hz 200 A
  • Insulation resistance at 100 V DC > 10 GΩ
  • Capacitance at 50 MHz < 1 pF
  • Operation and storage temperature -40°C  to +90°C (-40°F to 194°F )
  • Climatic category (IEC 60068-1) 40/ 90/ 2