Description
The PowAbeam 70Mhz 5 element is a lightweight and low profile high gain optimised design that uses 5/8″ tube for the PowAbeam coaxial dipole driven element and parasitic elements.
Tuned for the DX-er with rock solid RF stability whatever the weather. Superb performance in a 3.0 meter boom length
Design criteria… 50Ω DIRECT FEED Designed for DXers Stable wet weather performance
Designs optimized and resonated for DXers Frequency range70 – 72MHz with a VSWR of 1.5:1 or less at 70.2MHz
The aerial is supplied requiring assembly only – no drilling required. Pre-drilled single piece square boom section(s) Element clips pre-attached to the boom – the elements just need sliding into place Assembled PowAbeam coaxial dipole with 1m Ecoflex10 coaxial cable terminated in an in-line N Type socket. Assembly will take about 10 minutes and requires insertion of the parasitic elements into the clips (each are clearly marked) and mounting of the coaxial dipole. 8mm and 10mm spanners or sockets is all that is required to assemble the 4M5WB.