Going the extra mile

70MHz 6 Element Max-Gain (4M6N50U)

 

  • 12.4dBi Gain
  • 22dB F/B Ratio
  • 5.0m boom
  • Stauff clamp element fixing
  • All stainless steel fixings
  • Mast clamp included
  • 10 minutes to assemble
 

Availability: In stock

Price excl VAT: £99.00 Incl VAT: £118.80
 
OR

70MHz 6 Element Max-Gain (4M6N50U)

The PowAbeam 70Mhz 6 element is an ultra-lightweight and low profile high gain optimised design that uses 3/16" solid rod for the parasitic elements and 5/8" tube for the PowAbeam coaxial dipole driven element.

The aerial is supplied requiring assembly only - no drilling required.

  • Pre-drilled round boom section(s) with machined joining sleeves (if required)
  • Paraclip element clips pre-attached to the boom - the elements just need sliding into place
  • Assembled PowAbeam coaxial dipole with 1m Ecoflex10 coaxial cable terminated in an in-line N Type socket.

Assembly will take about 10 minutes and requires insertion of the parasitic elements into the clips (each are clearly marked) and mounting of the coaxial dipole (joining of the boom sections may also be needed if the boom is supplied in sections). A 10mm spanner or socket and a 4mm allen key are all that is required.

 

Below the 4M6N50U of M1DDD/P in use from a windy and wet /P location in IO93 during the 70MHz contest in April 2014

.4M6N50U antenna M1DDD/P 1093 70MHz contest