Going the extra mile

  • Shipment on new orders for all Gemini amplifiers is currently January 2019, PowAbeam antennas 3-4 weeks from order.

WIMO SHF 2344 23cm-Yagi 44-Element 18,1 dBD

 

  • Multiple-optimized design according to DL6WU
  • All holes of the boom drilled automatically by robot - extreme small tolerances
  • Elements automatically cut, length tolerance less than max. 0.1 mm
  • Elements are exactly centered and automatically mounted by robot
  • Non-compromise dipole: N-connector, balun made of semi-rigid cable, all connectors sealed, connection box additionally filled.
 

Availability: In stock

Price excl VAT: £141.63 Incl VAT: £169.96
 
OR

WIMO SHF 2344 23cm-Yagi 44-Element 18,1 dBD

The new design "SHF 2344" is the 'little brother' of the 5 m version and is quite a 'hummer' with its 3 m length. The antenna has a high bandwidth and may be used just as well for ATV operation. Of course, this antenna is supplied fully assembled; the awkward manual mounting process has been replaced by the assembly robots.

The antennas have an very high f/b ratio because of the use of 8 reflectors. This is in particular important for high-gain yagis: even the highest gain gets useless if unwanted signals or interferences are being received from the back side of the antenna. EME or SAT freaks enjoy our antennas due to the low backward noise scatter (from the surface of the earth). All nuts, bolts and washers are manufactured of stainless steel. For those antennas with support strut also the mast clamp itself is made of stainless steel (where else do you find this?).
The antennas are delivered pre-mounted with all elements already in place. They can be assembled in about 10 minutes; you don't have to read the manual (which is provided of course...) and it does not take an engineering approach to install the antenna and get into the air...